What you get :
4 x side brushes,
1 x roller brush,
1 x sets of high-performance filters and foam filter
For optimal use:
How to install
(No tool installation required)
1- Rolling brush: open the protective cover of the roller brush, align the interface and install it directly
2- Filter: open the bin, remove the filter by grabbing the white flap
3- Side brush: attach side brushes to the bottom of the robot by pushing a brush into each slot
1- Press the release button to remove the container.
2- Open the door of the container to empty it.
Cleaning the robot filter
1- Remove the filter by touching the white flap.
2- Shake off the dirt by knocking the filter against your waste bin.
Clean the roller brush, side brush and the robot swivel wheel
1- Take out the rolling brush and clean the vacuum cleaner cycle with a cloth.
2- Clean the rolling brush. Cut the hair wound in the roller brush with the knife of the included cleaning tool.
3- Remove the side brush, use a cloth to remove the dust from the brush.
4- Pull out the swivel wheel and then clean the swivel wheel with the cleaning tool.
Cleaning the sensors and charging pins.
1-To maintain the best performance, clean the drop sensors and charging pins regularly.
2- Dust the drop sensors and charging contact pins with a cloth or cleaning brush.